Shooting

Setting Time Code

Generator

Presetting the Time Code

Time code and user’s bit data generated from the internal time code generator are recorded.

This section describes how to set [TC/UB]-[TC Preset].

( P102 [ TC Preset ] ) Memo :

When [Main Menu]-[System]-[Record Set]-[Record Format]-[Frame & Bit Rate] is set to “50i(HQ)”, “50i(SP)”, “50p(HQ)”, “50p(SP)”, “25p(HQ)”, “24p(HQ)”, or “50i”, settings cannot be made in “Drop”.

( P112 [ Frame & Bit Rate ] )

You can configure the setting without accessing the [TC/UB] menu screen.

Memo :

Drop frame/non­drop frame mode

 When the frame rate setting in [Main Menu]- [System]-[Record Set]-[Record Format]- [Frame & Bit Rate] is “60p”, “60i”, or “30p”, the actual number of frames per second is approximately 59.94 (29.97). However, the time code processing standard is “60p”, “60i”, or “30p” frames. To make up for the frame number discrepancy, the drop frame mode (Drop) drops the 00 frame and 01 frame every minute except for minutes that are multiples of 10. However, in the case of “60p”, the 00, 01, 02 and 03 frame are dropped.

 The non­drop frame mode (Non Drop) does not drop frames and ignores the discrepancy with the actual time.

Setting Time Code

( P66 [Setting Time Code without Opening the Menu] )

Required Settings Before Preset

1Set [TC/UB]-[TC Generator] to “Rec Run” or “Free Run”.

( P102 [ TC Generator ] )

 [Rec Run]:

Preset data in the time code generator

operates in run mode during recording

mode. Set this when recording continuous

time code in connecting frames.

 [Free Run]:

MENU/THUMB

CANCEL

.

MENU/THUMB

CANCEL

AE LEVEL

OIS / 2

LOLUX / 3

Time code starts to operate in run mode from

the preset time in the time code generator.

2Select the framing mode for the time code generator (only when the frame rate setting is “60” or “30”).

Set using [Main Menu]-[TC/UB]-[Drop Frame].

( P102 [ Drop Frame ] )

[Drop]:

Sets the run mode of the time code generator to drop frame mode. Use this setting when placing emphasis on the recording time.

[Non Drop]:

Sets the run mode of the time code generator to non­drop frame mode. Use this setting when placing emphasis on the number of frames.

1Select [Main Menu]-[TC/UB]-[TC

Preset] and press the Set button (R).

( P102 [ TC Preset ] )

The [TC Preset] screen appears.

1

.

Memo :

When [TC/UB]-[TC Generator] is set to “Regen”, the parameter is displayed as “Regen”

and cannot be selected.

( P102 [ TC Generator ] )

64

Page 64
Image 64
JVC GY-HM650U specifications Setting Time Code Generator, Presetting the Time Code