JVC GY-HM650U specifications 107, Audio Set Item

HDMI Enhance

For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.

This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.

[Setting Values: On, ROff]

SD Aspect

For setting the style of displaying down­converted images on a 4:3 aspect ratio screen.

 Side Cut:

Displays image with the left and right sides cut off.

 Letter:

Displays as a wide image with the top and bottom blackened.

 Squeeze:

Displays image that is squeezed horizontally. [Setting Values: Side Cut, Letter, RSqueeze]

Memo :

When [Record Format]-[System] is set to “SD” or “HD+SD”, and when [SD Aspect] is set to “4:3”,

this item appears as “­­­” and cannot be selected. ( P111 [ System ] )

SD Set Up

For selecting whether to add a setup signal to the video signal output from the [AV] output terminal. Setup signals are added when “7.5%” is selected. [Setting Values: 7.5%, 0.0%]

(Default values: 7.5% (U model), fixed at “0.0%” (E model))

Memo :

Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.



Audio Set Item

Input1 Mic Ref.

For setting the reference input level when the [INPUT1] selection switch is set to “MIC” or “MIC +48V”.

[Setting Values: ­62dB, ­56dB, R­50dB, ­44dB, ­38dB]

Input2 Mic Ref.

For setting the reference input level when the [INPUT2] selection switch is set to “MIC” or “MIC +48V”.

[Setting Values: ­62dB, ­56dB, R­50dB, ­44dB, ­38dB]

Int. Mic Gain

For setting the sensitivity of the built­in microphone. [Setting Values: +12dB, +6dB, R0dB]

AUX Gain

For setting the sensitivity of the [AUX] terminal input.

[Setting Values: +12dB, +6dB, R0dB]

Ref. Level

For setting the audio reference level to be recorded to the SD card. (Applies to both [CH1/CH2].) [Setting Values: ­12dB, ­18dB, R­20dB]

Limiter

For setting the limiter operation.  Ref. Level:

Sets “Ref. Level” to the maximum recording level.

 ­8dBFS, ­5dBFS:

Sets “­8dBFS” or “­5dBFS” to the maximum recording level.

 Off:

Depending on the settings of the [CH1/CH2 AUTO/MANUAL] selection switches, the operation may be different as described below.  The limiter does not function when

“MANUAL” is set.

 The limiter functions at ­5 dBFS when “AUTO” is set.

[Setting Values: Ref. Level, ­8dBFS, R­5dBFS, Off]

AGC Response

Attack Time

Sets the time to activate the limiter. [Setting Values: Fast, RMiddle, Slow]

Decay Time

Sets the time to deactivate the limiter operation. [Setting Values: Fast, RMiddle, Slow]

Menu Display and Detailed Settings

107