Variable Frame Rec
Shooting in this mode allows you to obtain smooth slow motion or quick motion videos.
Using different frame rate settings for recording and playback, videos captured at normal speed can be played back more smoothly than those in low or high speed playback.
To enable Variable Frame Rec, the following two settings are required at the same time.
[Record
[3Resolution] is set to “1920x1080” or “1280x720”.
[Record
Number of Frames that can be Set
1Set [Resolution] and [Frame & Bit Rate]. ( P111 [ Resolution ] )
( P112 [ Frame & Bit Rate ] )
[Resolution]:
Set to “1920x1080” or “1280x720”.
[Frame & Bit Rate]:
Set to “30p(HQ)”, “24p(HQ)”, or “25p(HQ)”.
2Set [Rec Mode] to “Variable Frame”.
( P113 [ Rec Mode ] )
Set [Main
3Select a recording frame rate from [Frame & Bit Rate].
( P112 [ Frame & Bit Rate ] )
The selectable frame rates are as shown in the table below.
Memo :
When [Main
( P95 [ AE Level ] )
If the specified amount is not reached when recording is stopped, normal recording is performed and frames are added to the ending of the clip until the amount is reached. (Padding)
Caution :
The shooting frame rate cannot be changed during recording. To change the frame rate, stop the recording first and perform the change.
When [Main
Run”.
Audio cannot be recorded. A mark appears in the audio level meter display.
( P121 [Audio Level Meter] )
Shooting
Resolution | Frame & Bit Rate | Selectable Shooting Frame Rate | ||
1920x1080 | 30p(HQ) | | 30 | 27, 25, 24, 22.5, 20, 18, 15, 12, 10, |
|
|
|
| 6, 2 |
| 24p(HQ) | 30, 27, 25 | 24 | 22.5, 20, 18, 15, 12, 10, 6, 2 |
| 25p(HQ) | | 25 | 24, 22.5, 20, 18, 12.5, 10, 6, 2 |
1280x720 | 30p(HQ) | 60, 54, 50, 48, 45, 40, | 30 | 27, 25, 24, 22.5, 20, 18, 15, 12, 10, |
|
| 36, 32 |
| 6, 2 |
| 24p(HQ) | 60, 54, 50, 48, 45, 40, | 24 | 22.5, 20, 18, 15, 12, 10, 6, 2 |
|
| 36, 32, 30, 27, 25 |
|
|
| 25p(HQ) | 50, 48, 45, 40, 36, 32 | 25 | 24, 22.5, 20, 18, 12.5, 10, 6, 2 |
Effect during playback | Slow motion | Standard | Quick motion |
81