Safety Zone

For setting the percentage of area that is to be deemed as valid area (Safety Zone) within the boundary of the aspect ratio selected in [Aspect Ratio].

[Setting Values: 95%, 93%, 90%, 88%, 80%, ROff]

Center Mark

For specifying whether to display a mark to indicate the screen center within the aspect ratio selected in [Aspect Ratio].

[Setting Values: ROn, Off]



Display Settings Item

This menu is used to set the displays on the LCD monitor and viewfinder screen.

Zoom

For setting the display method of the zoom position.

 Number:

Displays the zoom position in numbers (0­99).  Bar:

Displays the zoom position in a bar.  Off:

Does not display the zoom position. [Setting Values: Number, RBar, Off]

Focus

For setting the display method of the focal length during manual focus.

 Feet:

Displays the focus in feet.  Meter:

Displays the focus in meters.  Off:

Does not display the focal length during focus. [Setting Values: Feet, RMeter, Off]

ND Filter

For setting whether to display the filter position. [Setting Values: ROn, Off]

Record Format

For setting whether to display the video format during recording or playback.

[Setting Values: ROn, Off]

Media Remain

For setting whether to display the remaining space of the recording SD card.

[Setting Values: ROn, Off] Memo :

When the remaining space warning is displayed, the information appears even when “Off” is selected.

The displayed time is an estimate.

TC/UB

For specifying whether to display the time code (TC) or user’s bit (UB) rate in the display on the LCD monitor and viewfinder screen.

[Setting Values: UB, RTC, Off]

Audio Meter

For specifying whether to display the audio level meter in the display on the LCD monitor and viewfinder screen.

[Setting Values: ROn, Off]

Battery

For setting the display of the remaining battery power in the display on the LCD monitor and viewfinder screen.

The battery information appears only on the Display 1 screen in Camera mode.

( P120 [Display 1 screen] )

Time:

Displays the remaining battery power in minutes. (min)

Capacity%:

Displays the remaining battery power in percentage. (%)

Voltage:

Displays the current battery voltage in units of 0.1 V. (V)

[Off]:

The remaining battery power is not displayed. [Setting Values: RTime, Capacity%, Voltage, Off] Memo :

The battery mark that appears before the “Time”, “Capacity%” or “Voltage” value changes according to the remaining battery power.

9 : 10 % and below

8 : 11 % to 30 %

4 : 31% to 70 %

) : 71 % to 100 %

When the remaining battery power is low, “RES” instead of the value is displayed.

Replace the battery as soon as possible.

The remaining battery power and remaining time are intended as reference values for the shooting duration.

Menu Display and Detailed Settings

105

Page 105
Image 105
JVC GY-HM650U specifications 105, Display Settings Item