3Upload starts.
The status of the transfer process is indicated by a progress bar.
.
Memo :
To stop uploading, press the Set button (R). Select [Yes] on the confirmation screen, and press the Set button (R) to stop uploading and return to the thumbnail screen.
If the file to be uploaded has the same file as an existing file in the FTP server, an overwrite confirmation window appears.
When “HTTP” is selected in the [Select FTP Proxy] screen of the network connection setting, the overwrite confirmation window will not be displayed and the existing file is overwritten.
4Upload is complete.
After all clips are uploaded successfully, “Successfully Completed.” is displayed. Press the Set button (R) to return to the thumbnail screen.
When clips are not uploaded successfully, the following errors are displayed.
Connecting |
|
|
| Cause of Error |
to | . | ( P159 [List of FTP Transfer Errors] ) | ||
the Network |
| |||
|
|
|
| |
Connecting via a Browser
You can access the web functions of this camera recorder via a browser on devices such as a smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in advance.
( P137 [Connect an appropriate adapter according to the intended use to the [HOST]
terminal at the rear of the camera recorder.] )
1Set the camera recorder to the Camera mode, and display the [Network] (status) screen.
Press the [STATUS] button on the camera recorder to display the status screen. Press the crossshaped button (HI) to display the [Network] screen.
Check the displayed [IP Address].
.
2Start up the browser on the terminal you wish to connect to the camera recorder, and enter the [IP Address].
(Example: 192.168.0.1)
If “192.168.0.1” is displayed in [IP Address], enter “http://192.168.0.1”.
http://192.168.0.1 |
. |
