JVC GY-HM650U specifications Interval Rec, Set Rec Mode to Frame Rec, Repeat Frame Rec

1Set [Rec Mode] to “Frame Rec”.

Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to “Frame Rec”.

( P113 [ Rec Mode ] )

The display changes (“STBY”-“STBY”).

2Set the number of frames to record in [Rec Frames].

Set using [Main Menu]-[System]- [Record Set]-[Rec Mode]-[Rec Frames].

( P113 [ Rec Frames ] )

3Start recording.

Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause.

The display changes (“STBY”-“RREC” -“STBY” (yellow text)).

The card slot status indicator lights up in green.

4Repeat Frame Rec.

Press the [REC] button again to record only the number of frames specified in [Rec Frames] and pause.

The display changes (“STBY”-“RREC” -“STBY” (yellow text)).

Frame Rec continues until the recording is stopped (step 5).

5Press and hold the [REC] button.

The card slot status indicator lights up in green.

Caution :

Do not remove the SD card during recording (“RREC”, red text) or recording pause (“STBY”, yellow text).

To remove the SD card during Frame Rec, press the [CANCEL] button, check that “STBY” (white text) is displayed and the card slot status indicator lights up in green before you remove the card.

When [Main Menu]-[TC/UB]-[TC Generator] is set to “Free Run” or “Free Run(Ext)”, the time code will be recorded in “Rec Run”.

 Audio cannot be recorded. A mark appears in the audio level meter display.

( P121 [Audio Level Meter] )

Interval Rec

In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card.

In this mode, recording and pause are performed repeatedly at the specified time interval. Only the specified number of frames is recorded.

The recording can be written to the media as a single clip until it is stopped.

Memo :
 Audio will not be recorded.
 Until a specified amount of recordings is
	accumulated, the file will not be written to the									Shooting
	performed until the same number is
	media.
 After the specified number of frames is recorded
	and written to the media, recording will be
	accumulated again.
 If the specified amount is not reached when
	recording is stopped, normal recording is
	performed and frames are added to the ending
	of the clip until the amount is reached. (Padding)
Press [REC]								Press [REC]
(Interval Rec starts)								(Interval Rec stops)
			Recording resumes			Recording resumes
	[Rec Interval]				[Rec Interval]
								Normal	recording
		Pause		Pause			Pause (Padding data)

Records number of frames specified in [Rec Frames]

Actual clips recorded to the media

. Specific amount of data

1Set [Rec Mode] to “Interval Rec”.

Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to “Interval Rec”.

( P113 [ Rec Interval ] )

The display changes (“STBY”-“STBY”).

2Set the number of frames to record in [Rec Frames].

Set using [Main Menu]-[System]-[Record

Set]-[Rec Mode]-[Rec Frames].

( P113 [ Rec Frames ] )

79