Preparations

Inserting an SD Card

This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback.

21

A

2

B

3

.

1Open the SD card cover.

2Insert an SD card with the notched corner pointing up.

The status indicator of the card slot to which the card was inserted lights up in red.

3Close the SD card cover.

Card Slot Status Indicator

The following table shows the respective states of slot A and B.

Lamp

Slot Status

Lights up in

The inserted SD card is being

red

accessed. (writing/reading data)

 

Do not turn off the power of the

 

camera recorder or remove the SD

 

card.

Lights up in

On standby. The inserted SD card

green

can be used for recording or

 

playback.

Light goes out

 SD card is not inserted.

 

 An unusable card is inserted.

 

 An SD card is inserted but a

 

different slot is selected.

Removing the SD Card

1Check that the SD card to be removed is not being accessed (status indicator of the card slot lights up in red).

2Open the SD card cover.

3Push the SD card and remove it from the slot.

4Close the SD card cover.

Memo :

When both slots are inserted with usable SD cards, the previously selected slot is used.

Caution :

Data may be lost if you turn off the power of the camera recorder or remove the SD card when it is being accessed. All data recorded on the card, including the file that is being accessed, may be corrupted. Be sure to check whether the status indicator is lighted in green or not before you turn off the power or remove the SD card.

If you mistakenly remove the card when it is being accessed, reinsert the card only after the status indicator goes off.

The SD card may not be recognized if you insert and remove the card within a short time. When this happens, remove the card and wait for a few seconds before you reinsert.

40

Page 40
Image 40
JVC GY-HM650U specifications Inserting an SD Card, Removing the SD Card, Close the SD card cover Card Slot Status Indicator