Synchronizing Time Code on Another Camera
This camera recorder is equipped with a time code input/output terminal ([TC] terminal).
Connect another camera recorder to the [TC] terminal and synchronize to the time code.
1Connect the [TC] terminal of the master device with the [TC] terminal of the slave device.
Set the [TC IN/OUT] switch of the master device to “OUT”, and the [TC IN/OUT] switch of the slave device to “IN”.
Master Device
[OUT]
Settings and Operation of the Camera Recorder
1 Set to Camera mode.
( P18 [Operation Modes] )
2Set [TC/UB]-[TC Generator] as follows.
Slave device:
Select “Free Run(Ext)”.
Master device: Select “Free Run”.
3Set LCD monitor or viewfinder to Display 1 screen.
4 Set the master device and run the time |
code. |
When the builtin time code generator is |
synchronized with the external time code |
data input, the icon on Display 1 screen |
lights up. |
When time code is not synchronized or time |
code input is not available, the icon goes |
Shooting
BATT.RELEASE
A
B
P/OCWHGER 
DEVICE |
|
AV | HD/SD |
| SDI |
HDMI |
|
REMOTE |
|
DC | HOST |
|
INPUT2 | INPUT1 |
|
REC
IN OUT
TC
out. |
00: 00: 00.00
Jan 24 , 2012 12 :34 : 56
5 . 6f t
Slave Device
(This Camera Recorder)
[IN]
IN OUT
|
|
|
|
| ND 1 /64 | ||
|
|
|
|
|
| AE+6 | |
|
|
|
|
|
| 0dB | |
4030 | 20 | 10 | 0 |
|
| F1. 6 | |
P13000K | 1 / 100 | ||||||
|
|
|
| ||||
.
Memo :
The builtin time code generator will continue |
BATT.RELEASE
A
B
P/OCWHGER 
DEVICE |
|
AV | HD/SD |
| SDI |
HDMI |
|
REMOTE |
|
DC | HOST |
|
INPUT2 | INPUT1 |
|
REC
TC
operation even when the master device is |
disconnected after synchronization. |
User’s bit will become data in the master device. |
While the [TC] terminal is connected, the time |
code may be out of synchronization when the |
[A/V |
setting of the Master device and Slave device is being changed.
.
( P106 [ HDMI/SDI Out ] )
67
