Memo :
When [System] under [Record Format] is set to “SD”, this item is fixed at “Low”.
When [System] under [Record Format] is set to “HD+SD”, this item can be set during HD recording, but will be fixed at “Low” during SD recording.
V Frequency
For specifying the correction frequency of the vertical contour. Set this according to the object. Low:
Emphasizes the low frequency range. Middle:
Emphasizes the intermediate frequency range. High:
Emphasizes the high frequency range. [Setting Values: Low, RMiddle, High]
Memo :
When [System] under [Record Format] is set to “SD”, this item is fixed at “Low”.
( P111 [ Record Format ] )
When [System] under [Record Format] is set to “HD+SD”, this item can be set during HD recording, but will be fixed at “Low” during SD recording.
“High” cannot be selected under the following settings.
When [Resolution] is set to “1920x1080”, and [Frame & Bit Rate] is set to “60i(HQ)” or “50i(HQ)”.
When [Resolution] is set to “1440x1080”, and [Frame & Bit Rate] is set to “60i(HQ)”, “50i(HQ)”, “60i(SP)” or “50i(SP)”.
Skin Detail
For turning On/Off the Skin Detail function, which is used to adjust the contour correction effect of the colors captured.
Select “On” to soften the detail at areas where skin tone is detected.
[Setting Values: On, ROff]
Level
For setting the level of contour correction (degree of softening) using the Skin Detail function. Decreasing the value increases the level of contour correction (degree of softening).
[Setting Values: 1, R 2, 3]
Range
For adjusting the range of skin tone to trigger the Skin Detail function.
Increasing the value increases the range. [Setting Values: 5 to +5 (R0)]
White Balance Item
Preset Temp.
For setting the color temperature when the [WHT BAL] switch is set to “PRESET”.
For details, refer to “[Adjusting the White Balance] P 56”.
Alternative Temp.
For setting the alternative color temperature in the Preset mode.
When the [WHT BAL] switch is set to “PRESET”, pressing the [,] button each time switches the color temperature setting in the Preset mode.
([Preset Temp.])[Alternative Temp.]) For details, refer to “[Adjusting the White Balance] P 56”.
AWB Paint
For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White Balance] P 56”.
Increase the number: Strengthens the red/blue.
Decrease the number: Weakens the red/blue.
[Setting Values: 32 to +32 (R 0)]
Memo :
This item is selectable when the [WHT BAL] switch on the right of the camera recorder is set to “A” or “B”. When “PRESET” is set, this item appears as “” and cannot be selected.
Different values can be specified for “A” and “B”.
After the [,] (Auto White Balance) button is pressed to readjust the white balance while [Clear Paint After AWB] is set to “On”, R and B values switch automatically to “0”.
