
Settings Item
For specifying networkrelated settings.
The display of the software keyboard for input varies according to the item you are setting.
( P93 [Text Input with Software Keyboard] )
Web
For setting the functions that make use of the web browser.
Web Access
To access via a web browser, set to “On”. [Setting Values: ROn, Off]
Camera Name
For setting the name to be displayed on the web browser. Enter not more than 8 characters using the software keyboard.
(Default value: HM650)
Change Password
Changes the password for accessing via a web browser.
The current password is displayed. Enter a new password directly.
Enter not more than 31 characters using the software keyboard.
Connection Setup
For configuring the network connection settings. Configure the settings by following the instructions on the [Wizard] screen that is displayed according to the type of adapter that is connected to the rear [HOST] terminal.
You can Store, Load, or Delete the settings you have specified on the [Wizard] screen.
Wizard
A [Wizard] screen appears according to the type of adapter that is connected to the rear [HOST] terminal.
Follow the instructions.
Load
Loads the settings on the [Wizard] screen.
( P156 [Reading the Connection Settings File] )
Store
Saves the settings on the [Wizard] screen.
( P155 [Saving the Connection Settings File] )
Delete
Deletes the saved settings.
( P156 [Deleting Connection Settings] )
Metadata Server
For registering the FTP server for importing the metadata and the path of the file to be imported. Up to 4 settings can be registered.
MetaFTP1 to MetaFTP4
(The name specified in the respective [Alias] items is displayed)
oAlias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Import Metadata] options.
* Enter not more than 31 characters. oServer
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
*Enter not more than 127 characters using single byte alphanumeric characters (a to z, 0 to 9), singlebyte hyphen [], or dot [.].
oPort
Enter the FTP server port number to use using an integer between 1 and 65535.
(Default value: 21) oFile Path
Enter the path name for the metadata file (“/pub/ meta.xml”, “/home/user/meta2.xml”, etc.)
* Enter not more than 127 characters. oUsername
Enter the user name for connecting to the FTP server.
* Enter not more than 31 characters. oPassword
Enter the password for connecting to the FTP server.
* Enter not more than 31 characters. oPASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, ROff]