Chapter 4 Printer Adjustments
2Using Narrow Paper (Head Pressure Adjustments)
The printer has already been
1.Looking at the check window on the upper frame, align the mark (the left edge of white plastic) with the width of the paper. (The print head is closed.)
2.Make fine adjustments, checking the print.
(a)When the print on right side is too light:
Move the mark to the right by turning the head pressure adjustment screw clockwise.
(b)When the print on the left side is too light:
Move the mark to the left by turning the head pressure adjustment screw counterclockwise.
∗These adjustments are useful for preventing ribbon wrinkle or paper skew. For more details, consult our service personnel.
Check window | Width of | paper |
|
25.4 | mm | 1 | in |
50.8 | mm | 2 | in |
76.2 | mm | 3 | in |
101.6 mm | 4 | in | |
When ribbon wrinkles or paper | |||
skews with paper width of 4 in or | |||
more |
|
|
|
Factory setting |
|
| |
44
