Blaupunkt Frankfurt C70 Storing stations automatically Travelstore, Scanning stations

RADIO MODE

The display shows the currently set value for sensitivity. “DX 3” denotes maximum sensi- tivity for long-range reception. “DX 1” is the minimum.

➮Press the MENU button 8once or OK 5repeatedly until the desired menu appears on the display. The settings are now stored.

Storing stations

Storing stations manually

➮Select the required FM memory level, FM1, FM2, FM3, FMT or either wave- length MW or LW.

➮Tune into the desired station as de- scribed under “Tuning into a station”.

➮Hold down one of the six soft keys 4 on which you wish to store the station for more than two seconds.

Storing stations automatically (Travelstore)

You can automatically store the six stations with the strongest reception in the region (only FM).The stations are stored in the FMT mem- ory.

Note:

Stations that were previously stored in this memory are deleted in the process.

To use the Travelstore function,

➮press the TUNE button >when in radio mode.

The radio function menu appears on the dis- play.

➮Press the soft key 4with the display allocation “TS”.

The automatic station storing procedure be- gins. “T-STORE” appears on the display. Af- ter the process is completed, the station stored in FMT memory location 1 is played.

Listening to preset stations

➮Select the memory or frequency range in which the station was stored.

➮Press the soft key 4 with the display allocation of the name of the desired station.

Scanning stations

Scanning receivable stations (Radio- SCAN)

You can briefly listen in to all receivable sta- tions. The scanning time can be set in the menu at between 5 and 30 seconds.

Starting Radio-SCAN

To start the Radio-SCAN function,

➮press the TUNE button >when in radio mode.

The radio menu function appears on the dis- play.

➮Press the soft key 4 with the display allocation “SCAN”.

The scanning process begins. The next re- ceivable station is briefly played.The stations are scanned in ascending order.

Scanning stored stations (Preset Scan)

You can listen in to all currently receivable stations on all memory levels. The scanning time can be set in the menu at between 5 and 30 seconds.

Starting preset scan

To start preset scan,

➮press the TUNE button >when in radio mode.

The radio function menu appears on the dis- play.

➮Press the soft key 4 with the display allocation “PS”.

The scanning process begins. The memory levels are scanned consecutively beginning with memory level FM1. An arrow symbol

52