Blaupunkt Frankfurt C70 Theft protection, KeyCard, Theft Protection, Inserting the KeyCard

THEFT PROTECTION

Theft protection, KeyCard

A KeyCard is supplied along with the radio.

The car radio can also be used with a sec- ond KeyCard.

If a KeyCard is lost or damaged, you can ob- tain a replacement KeyCard through a Blau- punkt dealer.

If you use two KeyCards, the settings of the first KeyCard also apply to the second Key- Card.You do, however, have the option of stor- ing the following functions individually: station-button allocation, traffic-information volume, beep volume, equaliser setting.

In addition, the last set values for wavelength, station settings, scanning time and switch- on volume remain stored.

This means that you always have your se- lected basic setting after inserting the Key- Card.

Inserting the KeyCard

➮Press the button 1. The operating panel opens.

➮Insert the KeyCard with the contact sur- faces facing down as illustrated in the picture (arrow 1).

2

1

3

➮Carefully place the KeyCard on the car- riage and slide it in as far as it will go in the direction of the arrow (2).

➮Close the operating panel (arrow 3).

Note:

If a wrong card, e.g. a cash card, is introduced into the car radio, “Wrong KC” will appear on the display.

Remove the wrong card and slide in a Key- Card your unit will recognise.

Removing a KeyCard

In order to unlock the operating panel,

➮press the button 1.

The operating panel then opens.

➮Place the card on the carriage and slide as far to the right as it will go.

➮Pull the card out of the operating panel.

➮Close the operating panel.

Note:

In order to prevent theft, remove the KeyCard when you leave the vehicle and leave the op- erating panel open.

For safety reasons, the operating panel should always be locked when the vehicle is in motion.

Making a second KeyCard “learn” the code Replacing a KeyCard

You can use the first KeyCard to make a sec- ond KeyCard “learn” to be an additional Key- Card when the car radio is in operation.

If you want a second KeyCard to “learn” the code,

➮insert the first KeyCard and switch the radio on;

➮press the MENU button 8.

➮press the soft key 4with the display allocation “KC”;

➮press the soft key 4with the display allocation “LRN”.

“LEARN KC” appears on the display.

42