Blaupunkt Frankfurt C70 Lost or damaged KeyCard, Optical theft protection display LED

THEFT PROTECTION

➮Remove the first KeyCard. “INSERT” appears on the display.

➮Insert the new KeyCard. “LEARN OK” appears on the display. To leave the KeyCard menu,

➮press the MENU button 8 once or OK 5repeatedly until the desired menu appears. The settings are now stored.

You can now use your car radio with the new KeyCard.

Note:

A maximum of two KeyCards can be used for each unit.

If you already have two Keycards for your unit and you make a third KeyCard “learn”, you will no longer be able to use the unit with the KeyCard not used during the “learning” pro- cess.

Lost or damaged KeyCard

If all KeyCards belonging to the car radio are damaged or lost, a new KeyCard must first be made to “learn” the unit’s master code, which can be found in your car radio pass.

Always keep your car radio pass in a safe place, but never in your car.

To find out how to prepare a new Keycard for use, please read the section “Making a new KeyCard “learn” the code/entering the mas- ter code”.

If necessary, you can use this KeyCard to make a second KeyCard learn the code. To find out how to do this, please read the sec- tion “Making a second KeyCard “learn”/replac- ing the KeyCard”.

You can obtain new KeyCards from your spe- cialist dealer.

Making a new KeyCard “learn” the code/entering the master code

If you no longer have a valid KeyCard for your unit and would like to make a new KeyCard learn the code:

➮insert the new KeyCard, which the unit does not recognise;

➮close the operating panel;

➮if necessary, switch off the radio;

➮Hold down the TUNE button >and the

second soft key from the top on the left 4at the same time;

➮switch the unit on using button 2. “0000” then appears on the display.

Enter the four-digit master code from your car radio pass as follows:

➮enter the number of the master code using the and buttons. To do this, press the buttons repeatedly until the desired number appears on the display;

➮alter the input position using the buttons 7;

➮When the master code is correctly dis- played, press the OK button 5.

The new KeyCard is accepted when the unit switches to playback..

Optical theft protection display (LED)

The ON button and the drive-compartment lights may flash when the unit is switched off and the KeyCard removed. For this, the “LED” menu setting must be at “on”.

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “KC”.

➮Press the soft key 4 with the display allocation “LED”.

The current status “LED ON” or “LED OFF” appears on the display.

ENGLISH

43