Wiring Safety
These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Study this section carefully. If there are differences between your machine and what is shown in this section, call Technical Support at
(570)
•SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not lim- ited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!
•QUALIFIED ELECTRICIAN. Due to the inher- ent hazards of electricity, only a qualified electrician should perform wiring tasks on this machine. If you are not a qualified electrician, get help from one before attempting any kind of wiring job.
•WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation.
•WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of seri- ous personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components before completing the task.
•MODIFICATIONS. Using aftermarket parts or modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire.
•MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.
•CAPACITORS/INVERTERS. Some capaci- tors and power inverters store an electrical charge for up to 10 minutes after being dis- connected from the power source. To reduce the risk of being shocked, wait at least this long before working on capacitors.
•CIRCUIT REQUIREMENTS. You MUST fol- low the requirements at the beginning of this manual when connecting your machine to a power source.
•EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (570)
Model G4013
