Grizzly G4181, G7873 owner manual Wheel Replacement, Tools Needed Qty, To replace a wheel

Wheel Replacement

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

If you damage one or more wheels, you can easily replace the wheels.

Tools Needed Qty

•Hex Wrench 5mm....................................... 1

To replace a wheel:

1.DISCONNECT THE POWER FEEDER FROM POWER!

-22-

2.Using a 5mm hex wrench, remove the two wheel retaining cap screws (Figure 16).

Cap

Screw

Figure 16. Wheel replacement.

3.Swap the old wheel with the new.

4.Reinstall the two cap screws, and tighten in an alternating pattern until the wheel is sec- cure.

Model G4181/G7873 1-HP Power Feeder