Grizzly G0465, G470, G0468, G0467 Set Up, Unpacking, Assembly, To assemble the air compressor

SECTION 3: SET UP

Unpacking

Your air compressor left our warehouse in a carefully packed crate or box. If you dis- cover the air compressor is damaged after you have signed for delivery, please imme- diately call Customer Service at (570) 546- 9663 for advice.

Save the container and packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

Assembly

To assemble the air compressor:

1.Remove all packing materials and any protective plastic bags, zip tie labels or tags from the compressor.

2.Be sure the air filter is attached to the cylinder head as shown in Figure 2.

Figure 2. Air filter attached to

cylinder head.

NOTICE

This machine should never be run without a full oil reservoir. The oil provides lubrication to the cylinder rings, which deliver the compressed air. Severe damage to the internal moving parts can occur if there is not adequate oil flow. Check the oil level frequently, and change the oil every 3 months.

3.Add compressor oil, or ISO 100/SAE 30W non-detergent oil, to the crank- case. Remove the oil breather (inset in Figure 3) on top of the crankcase and add oil into the hole. The oil level should be in the center of the sight glass as shown in Figure 3 (This step does not apply to the Model G0468).

Oil Breather

Figure 3. Proper oil level.

Model G0464/G0465/G0467/G0468/G0470 Air Compressors -9-