Grizzly G9730, G9731 owner manual Tailstock Info

Headstock Info
Spindle Bore	1-3/8 in.
Spindle Taper	MT#4.5
No Of Spindle Speeds	8
Spindle Speeds	105, 175, 260, 395, 610, 915, 1320, 2000 RPM
Spindle Type	D1-4 Cam Lock
Spindle Bearings	Tapered Roller
Spindle Length	16-1/4 in.
Spindle Length with 3-Jaw Chuck	21-3/4 in.
Spindle Length with 4-Jaw Chuck	20-3/8 in.
Tailstock Info
Tailstock Travel	4-5/16 in.
Tailstock Taper	MT#3
Tailstock Barrel Diameter	1.56 in.
Threading Info
No Of Inch Threads	32
Range Of Inch Threads	4 - 56 TPI
Range Of Longitudinal Feeds	0.0015 - 0.010 in.
No Of Longitudinal Feeds	24
No Of Cross Feeds	24
Range Of Cross Feeds	0.0005 - 0.0035 in./rev.
No Of Metric Threads	14
Range Of Metric Threads	0.5 - 6 mm
Dimensions
Bed Width	7-1/2 in.
Leadscrew TPI	8
Leadscrew Length	50 in.
Steady Rest Capacity	2-1/2 in.
Follow Rest Capacity	2-1/2 in.
Faceplate Size	10 in.
Leadscrew Diameter	7/8 in.
Feed Rod Diameter	3/4 in.
Floor To Center Height	44 in.
Construction
Base	Cast Iron
Headstock	Cast Iron
Headstock Gears	Flame Hardened Cast Iron
Bed	Induction Hardened Cast Iron
Body	Cast Iron
Stand	Cast Iron
Paint	Epoxy
Other
Kilowatt Output	2.2
Other Specifications:
Country Of Origin	Taiwan
Warranty	1 Year
Serial Number Location	On Right Back Side Machine Body (Machine's Electrical Control Panel),
	Above On/Off Switch

"+" BdYZa<.,(%$<.,(&B[\#H^cXZ.$%%