Grizzly G9922 instruction manual Introduction, Commentary

SECTION 3: INTRODUCTION

Commentary

We are proud to offer the Grizzly Model G9922 Oscillating Spindle Sander. The Model G9922 is part of a growing Grizzly family of fine wood- working machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction.

The Model G9922 is a stationary sander that is capable of a wide variety of operations. The 2" x 51⁄2" sanding spindle enables you to sand endless contours on the edge or surface of wood or plas- tic. The G9922 comes complete with motor and electrical package.

A number of sanding sleeves for the Model G9922 are available through the Grizzly catalog.

We are also pleased to provide this manual with the Model G9922. It was written to guide you through assembly, review safety considerations, and cover general operating procedures. It repre- sents our effort to produce the best documenta- tion possible. If you have any comments regard- ing this manual, please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our machines. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

2406 Reach Road

Williamsport, PA 17701

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

The specifications, drawings, and photographs illustrated in this manual represent the Model G9922 as supplied when the manual was pre- pared. However, owing to Grizzly’s policy of con- tinuous improvement, changes may be made at any time with no obligation on the part of Grizzly. Whenever possible, though, we send manual updates to all owners of a particular tool or machine. Should you receive one, we urge you to insert the new information with the old and keep it for reference.

To operate this, or any power tool, safely and efficiently, it is essential to become as familiar with its characteristics as possible. The time you invest before you begin to use your Model G9922 will be time well spent. DO NOT operate this machine until you are completely familiar with the contents of this manual. Make sure you read and under- stand all of the safety procedures. If you do not understand something, DO NOT operate the machine.

-6- G9922 Oscillating Spindle Sander