SPECIFICATIONS AND OPTIONS 11
■Specifications
• GENERAL
Frequency coverage | : Transmit | |
| Receive | |
Mode | : FM (16K0G3E) |
|
Channel spacing | : 25 kHz |
|
Current drain (at 7.5 V DC) | : TX High (5 W) | 1.5 A typical. |
| Max. audio | 200 mA typical |
| Power save | 20 mA typical |
Frequency stability | : ±10 ppm | |
Useable temperature range | : | |
Dimensions | : 61 (W) ⋅ 135(H) ⋅ 41(D) mm | |
(Projections not included) | 213⁄32(W) ⋅ 55⁄16(H) ⋅ 15⁄8(D) inch | |
Weight (approx.; with | : 360g (12.7 oz) |
|
• TRANSMITTER
Output power (at 7.5 V DC) | : 5 W (Hi), 3 W (Mid) and 1 W (Low) |
Modulation system | : Variable reactance frequency modulation |
Max. frequency deviation | : ±5 kHz |
Audio harmonics distortion | : Less than 10 % (at 60 % mod.) |
Spurious emissions | : Less than |
• RECEIVER
Receive system | : |
Sensitivity (12 dB SINAD) | : 0.25 µV typical |
Squelch sensitivity | : Less than 0.35 µV (at threshold) |
Intermodulation rejection ratio : 70 dB typical
Spurious response rejection ratio : 70 dB typical
Adjacent channel selectivity | : 70 dB typical |
Ham and noise ratio | : More than 40 dB |
Audio output power | : 0.35 W typical at 10% distortion with an |
| 8 Ω load |
■Options
DBATTERY CASE AND PACK
•
Battery case for 6 ⋅ AA (R6) alkaline cells. The same as supplied with the transceiver depending on versions.
•
7.2V/750 mAh
DCHARGERS
•
For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: approx. 1.5 to 2 hours
•
+
For rapid charging of up to 6 battery packs (six
•
DBELT CLIPS
•
•
Exclusive
•
Belt clip for swivel type. The same as supplied with the transceiver.
All stated specifications are subject to change without notice or obligation.
25