Icom IC-M2A instruction manual Battery Charging, Battery charging, Battery cautions

■Battery charging

Prior to using the transceiver for the first time, the Ni-Cd bat- teries must be fully charged for optimum life and operation.

CAUTION: To avoid damage to the transceiver, turn it OFF while charging.

•Recommended temperature range for charging:

+50°F to +104°F (+10°C to +40°C)

•Use the supplied AC adapter (BC-147A/E or BM-95V) only. NEVER use other adapters.

NEVER connect DC power to the battery case when in- stalling alkaline batteries. Such a connection will damage the transceiver.

BATTERY CHARGING 7

■Battery cautions

NEVER incinerate used Ni-Cd batteries. Internal battery gas may cause an explosion.

NEVER immerse batteries in water. If the battery case be- comes wet, be sure to wipe it dry BEFORE attaching it to the transceiver.

NEVER short terminals of the battery case. Also, current may flow into nearby metal objects so be careful when placing bat- tery cases in handbags, etc.

If your Ni-Cd batteries seem to have no capacity even after being charged, completely discharge them by leaving the power ON overnight. Then, fully charge the Ni-Cd batteries again. If the batteries still do not retain a charge (or very little), new batteries must be purchased.

DRecycling information (U.S.A. only)

The product that you have purchased contains a

rechargeable battery. The battery is recyclable. At

the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for bat-

tery recycling options in your area or contact your dealer.

17