6 SET MODE
DPriority scan function “Pr”
The transceiver has 2 scan types. Normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in se- quence while monitoring Channel 16.
Normal scan (default)
DScan resume timer “St”
The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until a received signal disappears. When ON is selected, the scan pauses for 5 sec. after receiving a signal and then re- sumes even if the signal is still being received.
Scan timer OFF (default)
DAuto scan function “AS”
While in standby, this function automatically starts the desired scan (normal or priority scan) 30 sec. after operation.
•Scan indicator blinks while scanning.
Auto scan OFF (default)
DMonitor action selection “Sq”
The monitor function cuts off the squelch function temporarily. This selection contains PUSH or HOLD settings as shown below.
•PUSH (Pu): After pushing the [SQL•MONI] for 1 sec., the squelch function is cut off until [SQL•MONI] is released. (default)
•HOLD (Ho): After pushing the [SQL•MONI] for 1 sec., the squelch function is cut off continuously until another key is pushed.
Monitor switch PUSH (default)
14
