Icom IC-M2A instruction manual Installing batteries Battery case, Charging connections

(Not supplied with some versions)

7 BATTERY CHARGING

ïCharging connections

qAttach the BC-150 to a flat surface, such as desk or cabin, etc., if

desired.

wConnect the AC adapter (BC-147A/E or BM-95V) as shown below. e Insert the battery pack with/without the transceiver into the

charger.

•The charge indicator lights green.

rCharge the battery pack approx. 8 hours, depending on the re- maining power condition.

CAUTION: DO NOT charge BP-224 more than 12 hours. Otherwise, BP-224 will be damaged. BP-224 must be charged for 8–12 hours only.

IC-M2A

BP-224

Charge indicator

Lights green when

BP-224 (with/without

IC-M2A) is inserted.

Supplied screws

AC adapter
(BC-147A/E	BC-150
or BM-95V)

■Installing batteries in the

battery case

When using a battery case attached to the transceiver, install 6 ⋅ AA(R6) size alkaline batteries as illustrated below.

qRemove the battery case from the transceiver. w Install 6 ⋅ AA(R6) size alkaline batteries.

•Be sure to observe the correct polarity.

CAUTION:

•When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together.

•Keep battery contacts clean. It’s a good idea to clean bat- tery terminals once a week.

18