Icom IC-M2A instruction manual 0SUB Channel Readout, 1BATTERY Indicator, 4CHANNEL Number Readout

o DUALWATCH/TRI-WATCH INDICATORS (p. 10) “DUAL” appears during dualwatch; “TRI” appears during tri-watch.

!0SUB CHANNEL READOUT

•Indicates Channel 16 during priority scan.

•Indicates Channel 16 during dualwatch or tri-watch. (p. 10)

•Indicates the SET mode item while in SET mode

!1BATTERY INDICATOR

Indicates remaining battery power.

Indication
Battery level	Full	Middle	Charging	No
			required	battery

!2SQUELCH LEVEL INDICATOR (p. 7) Shows squelch level when set.

This indicator can be also used as an S/RF meter when the S/RF meter indicator setting is ON. (p. 16)

!3SQUELCH LEVEL ADJUSTING INDICATOR (p. 7) Appears while adjusting the squelch level.

!4CHANNEL NUMBER READOUT

•Indicates the selected operating channel number.

•In SET mode, indicates the selected condition.

PANEL DESCRIPTION 2

!5CHANNEL GROUP INDICATOR (p. 6)

“U” appears when U.S.A.; “I” appears when International; “C” appears when the Canadian channel group is se- lected.

!6TRANSMIT POWER INDICATOR

•“LOW” appears when low power is selected. (p. 8)

•“LOW” blinks when switching forced low power mode be- cause of a high temperature error or low voltage.

•“MID” appears when middle power is selected. (p. 8)

•No indicator appears when high power is selected.

5