![](/images/new-backgrounds/1261382/26138231x1.webp)
SECTION 4: OPERATIONS
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all times to reduce this risk.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Basic Controls
Use Figure 7 and the descriptions below to become familiar with the basic controls of your machine.
Sanding Belt Tracking/Tension Release Knob: Turning the knob adjusts the belt tracking left and right. Pushing the knob inward releases tension from the sanding belt for easier belt removal.
ON/OFF Switch: Supplies power to the motor, moving the sanding belt.
Table Lock Lever: Tightens to secure the table and loosens to allow for repositioning of the table for angle sanding.
Sanding Belt |
Tracking/ |
Tension |
Release Knob |
ON/OFF Switch |
Table Tilt Lock Lever |
Figure 7. Basic controls.
Model H3140 (Mfg. after 6/02) |