After First 50
Hours Of Use
After the first 50 working hours or 30 days, whichever comes first, perform the following maintenance:
•Replace the oil in the motor with com- pressor oil (use ISO 100 of SAE 30W viscosity, non detergent type).
•Make sure that all the fittings are tight.
•Remove the air filter foam element shown in Figure 14 and rinse it out with water. Allow it to dry and re- install.
Figure 14. Air filter foam element
¥Blow out any accumulated dirt between the cylinder cooling fins.
Weekly
If the compressor is used on a daily basis, perform the following checks each week:
•Rinse the air filter foam element in water.
•Check for loose bolts or fittings.
The Model H3372 3 HP Air
Compressors are specifically designed for air tool operation. DO NOT MODIFY AND/OR USE THIS MACHINE FOR ANY OTHER PUR- POSE. Modifications or improper use of this tool will void the warran- ty. If you are confused about any aspect of this machine, DO NOT use it until you have answered all your questions. Serious personal injury may occur.
Like all power tools, there is danger associated with operating this equipment. Accidents are frequently caused by lack of familiarity or fail- ure to pay attention. Use this tool with respect and caution to lessen the possibility of operator injury. If normal safety precautions are over- looked or ignored, serious personal injury many occur.
H3372 3 HP Air Compressor |
