MODEL H7724 |
60" WORKBENCH |
INSTRUCTIONS |
Inventory |
Use the parts breakdown and listing in Figure 2 and on Page 4 to arrange your workbench parts and inventory your shipment.
If any nonproprietary parts are missing (e.g. a bolt or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.
Figure 1. Model H7724 Birch Workbench.
Features
•
•Four 191⁄4"W x 14"D x 2 1⁄4"H
•Two 191⁄4"W x 14"D x 4 1⁄4"H
•Two 211⁄4"W x 143⁄4"D x 12 1⁄2"H Storage cabi- nets.
•
•Four chrome bench dogs.
•Overall dimensions: 661⁄2" wide x 20" in depth x 34" tall.
•Shipping weight: 148 lbs.
Safety & Limitations
•Maximum workbench table load is 500 lbs.
•Do not stand or climb on the workbench.
•Do not apply an unbalanced load on the table that could result in workbench tipping over.
•Keep children away from the workbench.
•Do not use workbench outdoors or in wet or damp locations.
•Do not overload the dogs or vise.
Figure 2. Fastener kit inventory.
Note: Refer to Page 4 for kit item part numbers.
Assembly
Use the steps and figures below and refer to the labels on the workbench parts to properly assem- ble your workbench.
Tools Needed | Qty |
Phillips Screwdriver #2 | 1 |
Hex Wrench 4mm (Included) | 1 |
Hex Wrench 5mm (Included) | 1 |
To assemble your workbench: |
|
1.Place the table (A) face down on the left over shipping cardboard to avoid scratching the workbench top.
Copyright © APRIL 2009 By Grizzly Industrial, Inc. REVISEd december, 2011 (ST)
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
(For models manufactured since 12/11) #CR11708 printed in CHINA
