Grizzly H7826 owner manual Introduction, Foreword Contact Information, Machine Data

INTRODUCTION

Foreword Contact Information

We are proud to offer the Grizzly Model H7826 Flooring Nailer. This model is part of a growing Grizzly family of fine pneu- matic tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commit- ment to customer satisfaction.

It is our pleasure to provide this manual with the Model H7826 Flooring Nailer. It was written to encourage safety consid- erations and guide you through general operating procedures and maintenance.

The specifications, details, and photo- graphs in this manual represent the Model H7826 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga-

tion on the part of Grizzly.

If you have any comments regarding this manual, please write to us at the following address:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

Machine Data
Nail Length	11⁄2"-2"
Magazine Capacity	100 Nails
Air Inlet	3⁄8" NPT
Flooring Nailer Weight	111⁄3 lbs.
Hammer Weight	21⁄2 lbs.
Operating Pressure	70-110 PSI
	Read the manual before operation.
	Become familiar with this tool, its
	safety instructions, and its operation
	before beginning any work. Serious
	personal injury may result if safety or
	operational information is not under-
	stood or followed.

Model H7826 Flooring Nailer -1-