2.Use a fine flat file to angle the metal fret ends, as shown in Figure 18.

Figure 18. Filing fret ends.

Note: File enough of the fret ends so they are not sharp, as shown in Figure 19.

Figure 19. Example of correctly angled fret

ends.

-12-

Final Sanding

 

Components and Hardware Needed:

Qty

Mandolin Body

1

To prepare the mandolin for finishing:

 

1.Inspect the entire mandolin under bright lights and take note of any glue residue, dents, scratches, and areas needing further sanding.

2.Carefully scrape away any glue residue with a sharp chisel held perpendicular to the sur- face as shown in Figure 20.

Figure 20. Example of removing glue residue.

3.Wear a NIOSH-approved respirator and ANSI-approved safety glasses during the next step to protect against dust!

4.Use #220 grit sandpaper to smooth any flaws found when inspecting the mandolin.

5.Final sand the entire mandolin, except the fretboard, with #320 grit sandpaper.

H8067 Flat Iron Style Mandolin Kit

Page 14
Image 14
Grizzly H8067 owner manual Final Sanding, To prepare the mandolin for finishing