Manuals / Grizzly / Kitchen Appliance / Bread Maker

Grizzly H8067 Parts Inventory, Supplies/Tools, Part #, Description, Recommended Tools & Supplies

Models: H8067

1 28

Download 28 pages 35.03 Kb

Page 6

SECTION 3: PARTS INVENTORY

SECTION 3: PARTS INVENTORY

Inventory

REF	PART #	DESCRIPTION	QTY
1	PH8067001	Mandolin Body	1
2	PH8067002	Neck	1
3	PH8067003	Fretboard	1
4	PH8067004	Bridge	1
5	PH8067005	Tuning Machines	2
6	PH8067006	Tailpiece	1
7	PH8067007	Nut	1
8	PH8067008	Endpin	1
9	PH8067009	Dowels	2
10	PH8067010	Strings	8
11	PH8067011	Bushings	8
12	PH8067012	#3 x 3/4" SS Screw	1
13	PH8067013	#1 x 3/8" SS Screws	14

9

11

10

1312

Figure 2. Additional components.

Supplies/Tools

The majority of the wood components in this kit come fully machined and ready for assembly. A small amount of sanding and finish work is need- ed to complete the mandolin.

Recommended Tools & Supplies:

1

2

3 5

4

8

7

6

• Wood Glue—Titebond Original Wood Glue
• #80 to #320 Sanding Paper
•	Flexible Sanding Block
• “000” Grade Steel Wool
• Clamps or Rubber Strips (made from cut up
	inner tubes)
•	Electric/Cordless Drill
•	Drill Bit (1/16")
•	Small Brad Nails
•	Wire Cutters
•	Razor Blades
•	Chisel
•	Phillips Screwdriver

Figure 1. Boxed components.

-4-

•	Masking Tape
•	Lightweight Hammer
• Rubber Dead Blow Hammer
•	Steel Straight Edge
•	Sharp Pencil
•	File Assortment
•	Finishing Materials
•	Electronic Tuner
•	Coat Hanger
•	NIOSH Approved Respirator
• ANSI-Approved Safety Glasses

H8067 Flat Iron Style Mandolin Kit

Image 6

Grizzly H8067 owner manual Parts Inventory, Supplies/Tools, Part #, Description, Recommended Tools & Supplies

Contents

COPYRIGHT NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC OWNERS MANUALMODEL H8067 FLAT IRON STYLE MANDOLIN KIT #BL8554 PRINTED IN JAPANPage SECTION 5 ASSEMBLY Table of ContentsSECTION 1 SAFETY WARRANTY AND RETURNSSECTION 1 SAFETY H8067 Flat Iron Style Mandolin KitSECTION 2 INTRODUCTION ForewordContact Info Supplies/Tools SECTION 3 PARTS INVENTORYInventory PART #Tuner or Tuning Machine IdentificationFigure 3. Model H8067 main features Tuning PegFretboard SECTION 4 SANDINGBodyNeck Wait until the fretboard is installed before sanding the neckTo install the neck SECTION 5 ASSEMBLYNeck to the Body Components and Hardware NeededNote Check alignment frequently. A little bit of sanding can cause large adjustments Page To attach the fretboard to the neck FretboardComponents and Hardware Needed Mandolin BodyTo clean up the binding and fret ends Shaping NeckShaping Fretboard Components and Hardware NeededFinal Sanding Components and Hardware NeededTo prepare the mandolin for finishing Components and Hardware Needed FinishingPainting/Finishing Tips To finish the mandolinTo install the tailpiece NutTailpieceTo install the nut Components and Hardware NeededTo install the tuning machines Tuning MachinesFitting Bridge Components and Hardware Neededbe exactly in tune and then adjusting the Placing Bridgetronic tuner by tuning the harmonic note to Components and Hardware NeededTo install the mandolin strings Winding StringsString Height Components and Hardware NeededTuning Important issues to consider when tuning a mandolinTo check the string height at the 12th fret G7984-Face Shield H1298-Dust Sealed Safety Glasses AccessoriesSECTION 6 REFERENCE INFO H1300-UV Blocking, Clear Safety GlassesH3632-Large Half-Mask Respirator G8979-6 Pc. Mini File SetH2499-Small Half-Mask Respirator H3631-Medium Half-Mask Respirator H3633-Disposable Cartridge Filter PairWARRANTY AND RETURNS H8067 Flat Iron Style Mandolin Kit Page Page