Grizzly H8070 owner manual String Retainers, To install the strings using only the bridge

To install the strings using only the bridge:

1.Slide the 1st string through the corresponding hole in the bridge (Figure 32).

2.Repeat Steps 3-8in the previous subsec- tion.

Saddle

Figure 32. 1st string installed.

String Retainers

Components and Hardware Needed:	Qty
Neck and Body (Assembled)	1
String Retainers	2
Chrome Screws 2.5 x 14mm	2

The string retainers mount between the 1st and 2nd strings and between the 3rd and 4th strings (Figure 33). String retainers are designed to hold the strings down against the nut to achieve cor- rect tuning.

2nd Retainer

				1st Retainer
	Figure 33. String retainer locations.
To install the string retainer:
1.	Place the 1st string retainer on top of the 1st
	and 2nd strings near the second tuner.
2.	Using	a	1	⁄16" drill bit	positioned through the
	string	retainer, drill a			1	⁄4" deep hole into the
	headstock.
	Note:	Drilling the hole deeper than					1	⁄2" could
	result in drilling out the bottom of the head-
	stock.
3.	Slide a 2.5 x 14mm screw through the retainer
	and fasten it to the headstock (Figure 33).
4.	Place the 2nd string retainer on top of the 3rd
	and 4th strings and repeat Steps 2-3.

H8070 Heirloom Telecaster-Style Guitar Kit -19-