Grizzly H8100 instruction sheet Introduction, Assembly

MODEL H8100

8 TON LOG SPLITTER

INSTRUCTION SHEET

EYE INJURY HAZARD!

Always wear ANSI approved safety glasses when using this log splitter!

Introduction

The Model 8100 8-Ton Log Splitter will split logs from 141⁄4" to 231⁄4", and the hydraulic 6" ram stroke will separate the toughest grain.

J

L

	I	A
C

D

E

K

B F, G, H

Figure 1. Model H8100.

Inventory & Identification: (Figure 1)
A.	Log Splitter Main Body	1
B.	Stabilizer Bars	2
C.	Return Springs	2
D.	Elevation Foot Pedal	1
E.	Hex Bolt M6-1 x 16 (foot pedal)	1
F.	Hex Bolts M10-1.5 x 25 (stabilizer bars)	4
G.	Hex Nuts M10-1.5 (stabilizer bars)	4
H.	Lock Washers 10mm (stabilizer bars)	4
I.	Splitter Workbench	1
J.	Wedge Assembly	1
K.	Pressure Release Pedal	1
L.	Wedge Release Pins (one on each side)...	2
Assembly
	Note: Refer to the Parts Breakdown for
	additional assembly details.

1.Insert the elevation foot pedal into the hydrau- lic pump bracket and secure it with the M6-1.0 x 16 hex bolt.

2.Attach the stabilizer bars to the base with the M10-1.5 x 25 hex bolts, hex nuts, and lock washers.

3.Install the return springs between the splitter workbench and the base.

This log splitter is only intended to be used to split logs! Serious injury may occur if this log splitter is used for any other purpose.

If you need help with your new log splitter, call our Tech Support at: (570) 546-9663.

Copyright © DECEMBER, 2006 By Grizzly Industrial, Inc. Revised may, 2009 (tr)

Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.

(For models mfg since 5/09) #TS8805 printed in CHINA