MODEL H8110 |
9 DRAWER EURO STYLE |
|
INSTRUCTIONS |
Assembly |
Figure 11. Model H8110 Birch Workbench.
Specifications
Refer to the last page of these instructions to inventory your shipment for ease of assembly.
To assemble the workbench:
1.Position the right side leg (C) on the floor so the UP arrow is pointing upward and the FRONT arrow points to the front, as shown in
Figure 12.
2.Place the two lower cross braces (E) on the floor so the slots face each other, as shown in Figure 12.
Finish | Lacquer Sealed |
Drawer Slides | Ball Bearing |
Number of Drawers | 9 |
Front Vise Size | 193⁄4" x 7" |
End Vise Size | 6" x 6" |
Overall Size | 841⁄2"W x 2411⁄16"D x 341⁄4"H |
Drawer Size | 153⁄8"W x 137⁄8"D x 4"H |
Storage Shelf Size | 551⁄2"W x 181⁄2"D |
Shipping Weight | 367 lbs. |
Safety & Limitations
•Maximum workbench table load is 500 lbs.
•Do not stand or climb on the workbench.
•Do not apply an unbalanced load on the table that could result in the workbench tipping.
•Keep unsupervised children away from the workbench.
•Do not stand or climb on the workbench.
•Do not use workbench outdoors or in wet or damp locations.
•Do not overload the vises or use cheater pipes on the vise handles to increase lever- age.
•Do not weld on this bench.
| C |
|
|
| E3 |
E | E4 | E2 |
|
| |
| E |
|
Figure 12. Right leg and cross brace installation.
3.Insert the barrel nuts (E4) (Figure 12) into the ends of the cross braces so the slotted end faces outward and the screwdriver slots are aligned horizontally with the direction of the cross braces.
4.Insert the cross braces into the mortised holes into the right-side leg, as shown in
Figure 12.
Copyright © JULY 2009 By Grizzly Industrial, Inc.
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
(For models manufactured since 7/09) #CR12018 printed in CHINA
