Grizzly H8148, H8150, H8149 owner manual Inventory, Box Contents Qty

Inventory

Inventory

After all the parts have been removed from the box, you should have the following items:

Box Contents: (Figure 3 & 4) Qty

A.Heavy-Duty Bench Grinder Unit

	(Not Shown)	1
B.	Left Lens Hanger	1
	Right Lens Hanger (Not Shown)	1
C.	Left Spark Arrestor	1
	Right Spark Arrestor (Not Shown)	1
D.	Lens	2
E.	Nut Plates	2
F.	Left Tool Rest	1
	Right Tool Rest (Not Shown)	1

G.Hardware and Tools (Not Shown): Qty —Flange Screws M6-1 x 12mm

(Eye Shield)	2
—Lock Washers 7mm (Eye Shield)	2
—Flat Washers 7mm (Eye Shield)	2
—Female Knobs M6-1.25 (Eye Shield)	2
—Hex Bolts M6-1.25 x 10mm (Eye Shield) 4
—Flat Washers 7mm (Eye Shield)	4
—Phillips Head Screws #10-24 x 3⁄8"
(Eye Shield)	4
—Flat Washers 8mm (Tool Rest)	4
—Hex Bolts 5⁄16"-18 x 3⁄4" (Tool Rest)	4
B
C
E
D
Figure 3. Left eye shield assembly.

F

Figure 4. Left tool rest

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

-12- H8148/H8149/H8150 Heavy Duty Bench Ginders