The strongest mounting option is a "Through Mount" where holes are drilled all the way through the workbench, and hex bolts, washers, and hex nuts are used to secure the grinder to the work- bench.
����
�����������
������������
���������
�����������
�����������
�������
Figure 7. Example of a through mount setup.
Another option for mounting is a "Direct Mount" where the machine is simply secured to the work- bench with a lag screw.
���������
�����������
������������
���������
Figure 8. Example of a direct mount setup.
2.Check the stability of the mounted grinder to make sure it is stable enough to be used safely.
3.Always make sure the grinder is bolted or clamped to the workbench, table, or grinder stand before use.
H8148/H8149/H8150 Heavy Duty Bench Grinder
Tool Rest and Eye
Shield
The tool rest supports the workpiece during grind- ing. Certain types of grinding may require jigs or accessories to assure the proper angle of the workpiece against the wheel.
The eye shield must be installed and positioned between the grinding wheel and your face during grinding. The eye shield is NOT a substitute for safety glasses or a safety face shield. You must wear ANSI approved face and eye protection.
To assemble the tool rest and eye shield:
1.Using the hardware from the inventory list on Page 12, assemble the left tool rest and eye shield as shown in Figures 9 & 10.
�������������
������������� ���������������
����������������
�����������
������� |
| ��������� |
��� |
| |
| ������������ | |
|
| |
�������������������������� |
| ��������������� |
|
| |
���� | ���� |
|
����� | �������������� | |
������ |
| |
������ |
|
|
������ |
|
|
����� |
|
|
|
| ��������� |
��������� | ��������������� | |
| ||
| ��������������� | |
