Hammer Head Tools
The Model H3142 Pneumatic Palm Hammer Kit includes a
Figure 5. Steel-faced hammer head.
Figure 6. Soft-faced hammer head.
To use the hammer head tools:
1.With the air NOT connected to the palm hammer, install the desired hammer head tool as per the “Changing Tools” instructions on page 5 of this manual, then connect the palm hammer to the air compressor.
2.Tap the hammer head against the object for a single blow.
3.Press and hold the hammer head against the object for multiple blows.
H3142 Pneumatic Palm Hammer Kit
Chisel Tool
The Model H3142 Pneumatic Palm Hammer Kit includes a chisel tool as shown in Figure 7.
Figure 7. Chisel tool.
To use the chisel tool:
1.With the air NOT connected to the palm hammer, install the chisel tool as per the “Changing Tools” instructions on page 5 of this manual.
2.Before tightening, rotate chisel so blade is parallel to your work surface while the palm hammer is held at the intended angle of operation.
3.Tighten the jam nut on the chisel threads into the base of the palm ham- mer to keep the chisel secured in its determined position.
4.Connect the palm hammer to the air compressor.
5.Press the chisel against the workpiece to make it actuate.