OPERATIONS
Test Run
Once assembly is complete, the machine is ready for a test run. The purpose of a test run is to identify any unusual noises and vibrations, as well as to confirm that the machine is perform- ing as intended.
To test run the Model W1713, do these steps:
1.Make sure that all tools have been removed from the scroll saw.
2.Turn the variable speed/power knob clock- wise to turn the scroll saw ON.
3.Once the scroll saw is running, listen for any unusual noises. The machine should run smoothly with little or no vibrations.
•If there are any unusual noises or vibra- tions, stop the scroll saw immediately by pushing the paddle switch down.
4.Unplug the scroll saw and investigate the source of the noise or vibration. DO NOT make any adjustments to the scroll saw while it is plugged in. The scroll saw should not be run any further until the problems are corrected.
OPERATIONS
THIS MACHINE throws wood chips and sawdust. Wear safety glasses or a face shield during all operations.
KEEP loose clothing rolled up and out of the way of machinery and keep hair pulled back.
THIS MACHINE produces sawdust that may cause allergic reactions or res- piratory problems. Wear a respirator in addition to using a dust collector.
