Grizzly Model H5698 instruction manual Standard Scroll Cutting, Interior Scroll Cutting

Standard Scroll

Cutting

To perform a standard scroll cutting opera- tion:

For standard scroll cutting, follow the pattern lines on the workpiece by pushing and turning the workpiece at the same time. DO NOT turn the workpiece without pushing it at the same time; otherwise, the blade could twist and break.

OPERATIONS

Interior Scroll

Cutting

The scroll saw can also make internal scroll cuts without having to cut through the perimeter of the workpiece.

To perform an interior scroll cutting opera- tion:

1.UNPLUG THE SCROLL SAW!

2.Remove the saw blade.

3.Drill a 1⁄4" hole in the workpiece.

4.Place the hole in the workpiece over the blade hole in the table insert.

5.Re-install the blade by sliding the bottom end of the blade through the workpiece hole. Note—If a plain end blade is being used, the lower blade adapter may need to be installed after the blade is slid through the workpiece.

6.Adjust the drop foot onto the surface of the workpiece.

7.Plug the scroll saw in and perform the cut- ting operation.

8.When the cutting operation is complete, unplug the scroll saw and remove the saw blade.

-18-