9.Place the assembled lower leaf bag frame into the leaf bag and connect it to the upper frame tubes with the M10 x 15 clevis pins and two 3mm hairpin cotter pins, as shown in Figure 13. Repeat for both sides.
Leaf Bag |
Upper Frame Tube |
Clevis Pin |
Hairpin Cotter Pin |
Lower Leaf Bag Frame |
Figure 13. Upper and lower frame connection.
10.Connect the snaps, as shown in Figure 14, then slide the bag frame bar into the pocket in the leaf bag and secure it with two M6 x 33 clevis pins and two 2mm hairpin cotter pins.
Bag Frame Bar | |
| Clevis Pin |
| Snaps |
Hairpin Cotter Pin |
|
Figure 14. Bag frame bar.
11.Insert the two support rods between the upper and lower bag frame assemblies, as shown in Figure 15.
Support Rods |
Frame Assemblies |
Figure 15. Support rods.
12.Feel along the length of the upper bag tube for the hole in the area indicated by the Figure 16 inset. Puncture the leaf bag using an awl or similar device, as shown. Attach the bag mounting tube to the upper bag tube with an M8 x 50 clevis pin, and secure it with a 3mm hairpin cotter pin. Place a rubber cap over the end of the bag mounting tube, as shown in Figure 16. Repeat for both sides.
Clevis Pin |
|
Hairpin |
|
Cotter Pin | Rubber Cap |
| |
Bag Mounting Tube |
|
| Upper Bag Tube |
Figure 16. Bag mounting tube.
T10043 38" Lawn Sweeper |
