5.Assemble the height adjustment lever, as shown in Figure 9. Refer to the inventory fig- ures on Page 2 for hardware identification.
Height Adjustment Lever | Latch Plate | ||||
|
|
|
| B |
|
|
| Knob |
|
|
|
|
|
|
|
| Z |
L Bracket |
| A |
|
| |
|
|
|
| ||
|
|
|
| U |
|
A |
|
|
| B | GG |
|
| V,Z |
|
| |
|
|
| Z | HH |
|
| II | HH |
|
| |
Z |
| HH | Z | ||
|
| ||||
Figure 9. Height adjustment lever.
6.Insert one of the rear bag tubes through the loops in the leaf bag. Make sure the holes in the tube are facing down, as shown in Figure 10.
Rear Bag Tube
Holes Facing Down
Leaf Bag
Figure 10. Rear bag tube placement.
7.Insert the upper bag tube through the pocket in the leaf bag and into the rear bag tube, then secure it with a plastic plug, as shown in Figure 11. Repeat for both sides.
Upper Bag Tube |
Plastic Plug |
Leaf Bag Pocket |
Rear Bag Tube |
Figure 11. Rear bag tube placement.
8.Assemble the lower bag tubes, the remain- ing rear bag tube, and the remaining plastic plugs, as shown in Figure 12. Make sure the holes in the rear bag tube are facing up.
Lower Bag Tubes
Plastic Plugs
Rear Bag Tube
Holes Facing Up
Figure 12. Lower leaf bag frame assembly.
T10043 38" Lawn Sweeper
