Angle Guide
The Model T10097 Wet Grinder comes with an angle guide to help identify and maintain the cutting angle on a variety of tools.
To use the angle guide:
1.. Locate the eight measuring notches on the angle finder (Figure 10).
Angle Edge |
Workpiece |
Desired |
Angle Notch |
Measuring |
Notches |
Figure 10. Measuring notches.
2.. Find the angle notch that best fits the tool you wish to grind by placing the beveled edge of the workpiece into each notch until you find the notch that most closely matches the angle of the beveled edge.
3.. Place the angle guide on the wheel with the desired angle notch (found in Step 2) against the wheel and adjacent to the universal support (Figure 11).
| Correct |
| Grinding Angle |
Desired | Workpiece |
Angle Notch | Angle Edge |
Figure 11. Angle guide usage.
4.. Adjust the positioning of the workpiece and the universal support height as necessary so that the sharpened edge of the workpiece is flat against both the grinding wheel and the angle edge on the angle guide as shown in Figure 11. For precision grinding attachments,
see Accessories on Page 18.
Model T10097 Wet Grinder |
