Grinding Jig
The Model T10097 Wet Grinder includes a grinding jig for securing a variety of tools during grinding.
To use the grinding jig:
1.DISCONNECT GRINDER FROM POWER!
2.Slide the grinding jig onto the universal support as shown in Figure 8.
Grinding
Jig
Universal
Support
Figure 8. Attaching grinding jig.
3.Insert the tool into the jig clamp, as shown in Figure 9, then use the angle guide, as described in Angle Guide on Page 15, to set the grinding angle.
Tool
(Varies)
|
| Lock |
Angle Guide |
| Knob |
|
|
|
Figure 9. Clamping tool.
4.Once the grinding angle is set, tighten both lock knobs (Figure 9).
Model T10097 Wet Grinder |
