SPX Cooling Technologies Marley Sigma Steel specifications Base

Marley / Sigma Steel CoolingTower / Specifications: Base

Specifications Specification Value

1.0Base:

12

1.1	Furnish and install an induced-draft,	■ Your specification base establishes the type, configuration, base mate-
	crossflow-type, field-erected, steel-	rial, and physical limitations of the cooling tower to be quoted. During
	framed, PVC-fill, industrial-duty cooling	the planning and layout stages of your project, you will have focused
	tower of _____ cell(s), as shown on	your attention on a cooling tower selection that fits your space allot-
	Plans. The limiting overall dimensions	ment, and whose power usage is acceptable. Limitations on physical
	of the tower shall be _____ wide,	size and total operating horsepower avoid the introduction of unfore-
	_____ long, and _____ high to the top	seen operational and site-related influences. Specifying the number of
	of the fan cylinder. Total operating	cells, and the maximum fan hp/cell will work to your advantage.
	horsepower of all fans shall not exceed	Crossflow towers are noted for the accessibility and maintainability of
	____ hp, consisting of ___ @ _____ hp
	motor(s). Tower shall be similar and	all operating components. The spacious interior provides easy access to
	equal in all respects to Marley Model	fill, drift eliminators, all basin accessories — and is one of two primary
	_______.	access ways to the fan, Geareducer, and other mechanical components.
		At the fan deck level, the hot water distribution basins are easily
		inspected and cleaned — while the tower is operating, if you wish. The
		mechanical equipment can also be readily accessed from this level.
		Except for the cold water basin, no counterflow tower component
		requiring routine maintenance is as easily accessed. The confined areas
		that typify counterflow designs can make difficult work for maintenance
		personnel!