Grundig 800 MILLENNIUM manual QUICK REFERENCE GUIDE, contd, Memory Functions, Rear Panel Controls

QUICK REFERENCE GUIDE, cont'd.

Activate (Enabling) Timer (page 22)	Press		'1' and/or'2'
Lock (or Unlock) Controls (page 14)	Press and hold		until		is displayed
	(extinguishes). Pushbuttons and TUNING knob are inactive
	(active).
Lamp On/Off (page 13)	Press	to turn display backlight on or off.
Disable Beep (page 13)	Press		to enable or disable audio beep.
MEMORY FUNCTIONS
Store Memory Channel (page 19)	Select bandwidth and adjust frequency.
	Press	. 'MEMORY' will light and channel number
	flashes,	use 'Direct-Key-Input' keypad to enter two digit
	memory channel number from '00' to '69'.
Recall Memory Channel (page 19)	Press		, desired two number digit from
	'Direct-Key-Input' keypad or use				and	buttons.
Skip Memory Channel (page 20)	Press		, desired two digit number from
	'Direct-Key-Input' keypad.
	Press	. 'S' will appear next to memory channel number.
Delete a Memory Channel (page 19)			desired two digit number from 'Direct-Key-Input'
	keypad.
	Press and hold			for 3 seconds.
Delete all Memory Channels (page 25)	With power off, press			while pressing the			button.
	Hold		until confirmation beep indicates all channel
	memory has been deleted.
SCAN MODE
The scan feature only works with channels
programmed within a block (page 20)
Scan memory (page 20)			desired two digit number from 'Direct-Key-Input'
	keypad to select the block to scan.
	Then		to start scan.
REAR PANEL CONTROLS	Select '1', '2', or 'WHIP' as desired. Connect appropriate
Shortwave Antenna Select (page 15)	antenna(s).
FM/AIR Antenna Select (page 15)	Select either 'EXTernal' or 'WHIP' as desired. Connect
	appropriate antenna.

27