FM
Selecting the tuner input source
1Press »M« repeatedly on the remote control or »MODE« on the device until »FM radio« ap- pears on the display.
Selecting stations – from presets
1 In the »FM radio« mode, press »1« to »0« on the remote control to select the presets from 1 to 10;
–The frequency of the station and the preset number appear in the display and the sta- tion is then played.
Selecting stations – from the list Recall Preset
1Press »FAV«.
2 Select the presets from 1 to 10 by pressing »
« or »
« or by turning the
3Confirm the preset by pressing »OK«.
–The preset number appears in the display and the station is then played.
Displaying RDS station informa- tion
If the device is receiving a RDS station, the sta- tion name and »R.D.S« appear in the display (if no information is available, the reception fre- quency appears in the display).
Station and track information appear as ticker text (radio text). If radio text is not available, other information can be displayed as an alter- native.
1 To display information on the current RDS sta- tion, press »i« repeatedly.
–The following displays appear in succession:
The current programme type (PTY), e.g. »Pop Music«. »[No PTY]« appears if no information is available;
the frequency; the current date.
Note:
7The information is displayed continuously until »i« is pressed again.
Stereo and mono reception
The device has an auto mode, which switches automatically between stereo and mono de- pending on the strength of the reception signal.
1Press »MENU« to open the FM menu.
2 Select the option »Audio setting« by pressing »
« or »
« or by turning the
3 Select the push button »No« by pressing »
« or »
« or by turning the
–The auto mode is activated; or
select the push button »YES« by pressing
»
« or »
« or by turning the
–The device is switched to mono reception; unwanted noise interference is suppressed.
38 ENGLISH
