![](/images/new-backgrounds/1247203/24720387x1.webp)
SPECIAL
Registering the device with the WLAN router with individual network settings
These settings require advanced knowledge of network configuration.
1Press »MENU« to open the menu.
2Select the option »System settings« by pressing »« or »
« or by turning the
3Select the option »Network« by pressing »« or »
« or by turning the
4 Select the option »Manual settings« by press- ing »« or »
« or by turning the
Time/Date |
|
Internet Setup |
|
Internet Wizard |
|
PBC Wlan setup |
|
View settings |
|
Wlan region | > |
Manual settings |
|
5 Select the option »Wired« or »Wireless« by pressing »« or »
« or by turning the Jog- Shuttle and confirm by pressing »OK«.
6 Select the option »DHCP enable« or »DHCP disable« by pressing »« or »
« or by turning the
Notes:
7Setting »DHCP disable« means all address- es must be entered manually.
7If »DHCP enable« is set, the addresses are automatically assigned by the router. If you have selected »DHCP enable«, continue with step 12.
7Enter the IP address.
Select the first number by pressing »« or »
« or by turning the
Select the next digit position by pressing »« or by turning the
back by pressing »« on the remote control). Repeat the procedure for all characters. Confirm the IP address by pressing »OK«.
Time/DateIP settings 3/9
IP adress
10 . 134 . 10 . 254 Subnet mask
255 . 255 . 254 . 0
8Enter the Subwork mask.
Select the first number by pressing »« or »
« or by turning the
Select the next digit position by pressing »« or by turning the
back by pressing »« on the remote control). Repeat the procedure for all characters. Confirm the number by pressing »OK«.
9Enter the Gateway address.
Select the first number by pressing »« or »
« or by turning the
Select the next digit position by pressing »« or by turning the
back by pressing »« on the remote control). Repeat the procedure for all characters. Confirm the number by pressing »OK«. Note:
7 The primary and secondary DNS (Domain Name System) are the network address of the server allocated by the provider.
10 Enter the Primary DNS.
Select the first number by pressing »« or »
« or by turning the
Select the next digit position by pressing »« or by turning the
« on the remote control). Repeat the procedure for all characters.
Confirm the number by pressing »OK«.