SIGNAL SEARCHING
POSITION |
| RESET | 1 Press the SEARCH button | |
ASPECT | FREEZE | ESC | When you press the SEARCH button, the projector begins | |
searching for input signals. If it detects an input signal, the | ||||
|
|
| ||
MAGNIFY | MUTE | search will cease and the projector will project the detected | ||
ON | OFF |
|
| |
VOLUME | signal. If the projector is unable to find an input signal at any of | |
its ports, it will return to the state it was in prior to the search. | ||
|
SEARCH
SEARCH
RGB IN 1
RGB IN 2 
VIDEO IN
COMPONENT VIDEO 
SELECTING THE ASPECT RATIO
AUTO |
| 1 | Press the ASPECT button | ||
MENU |
| KEYSTONE | ASPECT |
|
|
| ENTER |
|
|
|
|
POSITION |
| RESET |
|
|
|
ASPECT | FREEZE | ESC | RGB IN 1, RGB IN 2, COMPONENT VIDEO | ||
MAGNIFY | MUTE | (HDTV signals : 1125i (1035i/1080i), 750p) | |||
4:3 |
| 16:9 | |||
ON | OFF |
|
| ||
|
| VOLUME | VIDEO IN, | ||
|
|
| |||
|
| SEARCH | 4:3 | 16:9 | SMALL |
|
|
| |||
TEMPORARILY BLANKING THE SCREEN
|
| Press the BLANK button |
STANDBY/ON | BLANK | 1 The input signal screen is shut off, and a blank screen |
LASER |
| |
|
| appears. You can set the blank screen using the menu |
VIDEO | RGB | (from the SCREEN menu, select BLANK). Press the BLANK |
|
|
button again to remove the blank screen, and return to the input signal screen.
BLANK
AUTO
22
