![](/images/new-backgrounds/1230371/230371119x1.webp)
OPERATION USING EXTERNAL DEVICES------------------------------
DIGI LINK
Your television is equipped with the DIGI LINK function.
This function uses the CEC (Consumer Electronics Control) protocol.
CEC allows external devices which are connect- ed to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control.
Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the correspond- ing function.
The DIGI LINK functions on your television
Switching on the television automatically from standby
If the »Autom.
Automatic selection of the HDMI preset on the television
If your television is switched on and you then switch on the external device (e.g. DVD player), the appropriate HDMI preset on the television will be selected.
Selecting the menu language
The television menu language is automatically selected on the external device (e.g. DVD player). The external device must support this function.
Switching off the external device automatically
If you switch your television to standby, the ex- ternal device (if it is switched on) will also be switched to standby.
DIGI LINK is always active on your television set.
Searching for and activating external devices
You can connect up to 11 devices with DIGI LINK functions to your television.
1Open the Tools menu with »TOOLS«.
2Select the menu item »CEC« with »V« or »Λ« and press »OK« to confirm.
–The »HDMI CEC Device List« appears.
2Start the device search with »« (red).
–The devices found are displayed in the menu.
3Select the device for operation with »V«, »Λ«, »<« or »>« and press »OK« to mark it.
–If the selected device is connected to a different input to the current one, a switch to the respective input will occur auto matically.
4Press »MENU« to end the setting.
60 ENGLISH