35
ENGLISH
wireless network settings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
»Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
all connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) must
be configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that suppor t DHCP obtain the »DNS«
values that are required for »IP Address«,
»Netmask«, »Gateway« and internet access
automatically, and thus you are not required to
enter those values manually.
1 Open the menu with »menu«.
2 Select the line »INTER@CTIVE TV« with »
v
«
or »
Λ
« and press
»oK«
to confirm.
– The »INTER@CTIVE TV« menu appears.
inter@ctive Applications
Connection Type Wireless
IP Address
DNS
Netmask
Gateway
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
Network Configuration AUTO
Exit
Back
INTER@CTIVE TV
Network Settings
dd.mm.yyyy
hh:mm
Connect
Test Connection
OK
Select Access Point N/A
3 Select »Connection Type« with »
v
« or »
Λ
«
and then select »Wireless« with »
<
« or »
>
«.
smArt inter@Ctive tv AnD Home networK
4 Select »Network Configuration« with »
v
« or
»
Λ
« and then select »AUTO« with »
<
« or »
>
«.
5 Select »Select Access Point« with »
v
« or
»
Λ
« and confirm with
»oK«
.
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
6 Select the network that you want to connect
with »
v
«, »
Λ
«, »
<
« or »
>
« and confirm with
»oK«
.
– Wireless connection password screen is
displayed.
7 Select the required character with »
v
«, »
Λ
«,
»
<
« and »
>
« and move to the next character
with
»oK«
.
– Select »ABC« for uppercase and »abc«
for lower case and confirm with
»oK«
.
– Select »?@123« for numbers and symbols
and confirm with
»oK«
.
– Enter the password, select »Confirm« with
»
v
«, »
Λ
«, »
<
« or »
>
« and confirm with
»oK«
.
note:
7 In WEP encryption system, more than one
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
8 Start the registration to the home network by
pressing »« (red).
– The mesage »Connecting ... Please Wait«
appears.
9 Press »« (green) to make sure that the
network connection is established wit h the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
10 Press »menu« to end the setting.
note:
7 If you do not have a dynamic network,
follow the instructions in manual connection
section.