![](/images/new-backgrounds/1279369/27936925x1.webp)
TV MODE ADVANCED SET-UP
Connecting a 2nd TV and optional 2nd handset
If you wish you can connect a second TV to the Receiver/Player. This allows the second TV to view either the DVD picture or the Digital TV signal from a different room. If you purchase the optional External Infrared Receiver Kit you can also control the Receiver/Player from the second room.
1Press » «, select »SETUP« menu and press »OK«.
2Select »RF Modulator Setup« and press »OK«.
3Now choose if you wish the RF outputs enabled using »#«/»$« to select »ON« (picture available on 2nd TV) or »OFF« (picture on 2nd TV switched OFF)
4Now choose if you wish to enable the External IR for control from a 2nd room. Use »#«/»$« to select »ON« or »OFF«.
5You can adjust the channel of the RF modulator to avoid any interference from other TV channels. Choose a channel between 21 and 69 using »#«/»$«.
6Choose the output standard for the RF modulator. Use »#«/»$« to choose between
7To aid RF tuning, the Receiver/Player has a built in »Test Pattern«. Use »#«/»$« to turn it »ON« or »OFF«. The test card is two vertical white bars on a black background.
PIN number
You can choose a PIN (Personal Identification Number) for use with parental controls. The receiver was originally programmed with 1234. It is recommended that you change this for your own number.
1Press » «, select »SETUP« menu and press »OK«.
2Select »PARENTAL CONTROL« and press »OK«.
3Now enter the current PIN ****. (1234 if this is your first change).
4Select »CHANGE PIN« and press »OK«.
5Use »0..9« to enter a new PIN.
6Use »0..9« to confirm new PIN. When confirmed, this number is now stored.
KEEP THIS NUMBER SAFE!
7To exit menu press » «.
13